How to install a sliding glass door handle

The most commonly used options are matte, etched or high-shine. One important point to bear in mind is that toughened glass cannot be cut. This means that your new shower door handles will need to fit in the same space as your previous ones. Want to know how to install glass shower door handles? Read our hints and tips below.

Before you install a new glass shower door handle, you will need to remove whatever is already in place. For a single handle:. Furthermore, heat-strengthened glass is four to five times stronger than annealed glass, making it one of the most used glasses.

However, house owners should ensure that the glass meets all local safety standards before choosing one. The thickness of the glass is determined by the weight of the door and the strength needed.

Unlike thinner glass, thicker glass has more material. Furthermore, thicker glass options are available for applications that require high strength to increase safety.

Glass is primarily found in two standard shapes; rectangular and arched. Profiles are considered great for sliding security screen doors as it is the only way to make aluminum-clad doors match existing doors or windows.

A variety of coating can be applied to glass, making it more scratch-resistant and durable. Tinted coatings help reduce the amount of sunlight coming through the glass and absorb specific frequencies of light waves.

Such coatings are considered great for meeting energy-efficiency needs. You can also use decorative film on the exterior of the glass to create images or patterns, while you can also apply interior coatings to make it easier to clean. You must know how convenient and attractive sliding glass doors are. There are several other reasons homeowners decide to replace or repair their sliding glasses.

Sometimes, you would have to replace a few parts, while sometimes, the doors need maintenance. Let us find some major reasons to repair or replace your sliding screen doors. Sliding screen doors operate smoothly thanks to rollers placed on each side of the door. Sometimes, the rollers have an obstruction, and the door gets jammed. This is generally true for metal rollers which can corrode over time. It is essential to clean your rollers quite frequently to prevent obstructions such as dirt, leaves, and sticks.

While cleaning your floors, take a few minutes to clean the rollers with a brush. Replace your rollers if you find any cracks or bends. The whole door generally moves out of alignment if the rollers supporting the sliding screen door move off the track. It becomes quite hard to open or close the door until the problem is fixed.

It is generally caused by the screws that hold the roller against the track. Replacing your screws with new ones can be the best solution to get rid of this problem. Stand back and look at the door from the outside to check if your sliding glass door is aligned properly.

Please log in with your username or email to continue. No account yet? Create an account. Edit this Article. We use cookies to make wikiHow great. By using our site, you agree to our cookie policy. Cookie Settings. Learn why people trust wikiHow. Download Article Explore this Article parts. Tips and Warnings. Things You'll Need. Related Articles. Part 1. All rights reserved. This image may not be used by other entities without the express written consent of wikiHow, Inc.

Open the door and stick a door stop under the bottom edge of the door. Open up the door about halfway, so you can easily access both sides of the door handle. Push a door stop under the bottom edge of the door to keep it from moving and closing while you replace the handle. Look for a small slot in the side of the door knob or door handle where it connects to the cover plate or look on the side of the cover plate where it sits flush against the door.

Insert the tip of a flat-head screwdriver into the slot and apply pressure with the tip of the screwdriver, then pull the handle or door knob off. These parts are there to hide the inner workings of the door handle and give it an attractive appearance. Different handles come off in different ways.

Some types of handles might not come off separately. For instance, if your handle has a rectangular plate, the handle might be attached to the plate and will just come off when you remove the whole plate. Remove any screws that are holding the cover plates in place on either side of the door using a flat-head screwdriver. Insert the edge of your screwdriver under the plates and pry them up gently until they pop off, then remove them and set them aside.

Some might just snap into place, so you can just pry them right off using your screwdriver. Look for a slot on the side or bottom of the cover plate that you can slide your screwdriver into to pry it off.

Take out the screws holding the latch and inner plates in place. Unscrew and remove the screws holding the latch in place on the inside edge of the door.